What You Should Know About AC Repair And Maintenance

0 Comments

There are plenty of household chores that are essential in the successful running of your home. One of these chores that pay off the most is scheduling regular air conditioner maintenance.

When your air conditioner runs as efficiently as possible, it will use less energy to run, which means a decrease in your energy bills. Also, when your air conditioner is serviced every year, there is less risk of breakdowns, increasing the unit’s lifespan.

If you are looking at your air conditioner and aren’t sure if it is due for repair, inspect it. If you can spot issues early, it will prevent expensive repair costs later.

What You Should Know About Air Conditioning Maintenance

There are some air conditioner maintenance tasks that you can handle yourself; however, if there is a technical or if you believe you may need ac repair, it is best to leave the job to the professionals.

If you believe that you can handle specific jobs on your own, be sure to observe all safety warnings. You also want to make sure that the power is turned off in the electrical box before you begin working on your air conditioner.

We will give you some tips to help keep your air conditioning system running correctly and as inexpensively as possible.

Tip 1: Install a Smart Thermostat

If you are using an outdated thermostat, it could be costing you more money than you know. If you aren’t going to be at home all day, you can set the thermostat to raise the temperature in the house when you leave. You can also set it to turn down automatically when you are ready to head home. This will prevent you from wasting energy when there is nobody at home. This will ensure that the house is cold when you arrive home, but you won’t waste electricity by running the AC all day.

If you want to get the most out of your Smart thermostat, you should go with one that monitors and reports your energy use. This will let you see where and when you use the most energy so that you can make some changes.

Tip 2: Clean or Replace Your Air Filters

It is essential that replace your air filters when they get dirty. If you have a reusable air filter, make sure that you check it regularly. During high use seasons like summer and winter, you should check the air filter every month. During spring and fall, the low use seasons, you should check the air filter every other month. If you aren’t sure where your air filter is located, there are a few places that you can check.

*Behind the return air grille on a wall, in the ceiling, or in a house’s central room.

*Inside the blower compartment

*In a slot located at the bottom of the furnace, on the side or at the top.

If you don’t keep your air filter clean and fills up with dirt and dust particles, it can decrease the home’s airflow. This will require your system to work harder to reach the desired temperature in the house. Also, the air that does flow into the house will be loaded with dust and dirt, which results in poor air quality in your home. If a family member has asthma, allergies, or other respiratory illnesses, dirty air filters can trigger their symptoms.

If you want the best air quality, you should install a high-quality air filter. If you buy an inexpensive fiberglass filter, it won’t capture tiny particles such as pollen, viruses, and bacteria.

If you go with a pleated filter, you should check the MERV rating. MERV stands for Minimum Efficiency Reporting Value. If the MERV rating is high, it will be able to collect more airborne pollutants. In residential homes, the filters range from 1 MERV to 12 MERV. 1 is what you can expect from a window air conditioner, and 12 is considered superior. In some cases, you are better off installing a filtration system. If you like in a dusty region, if you have pets or if any member of your family has a respiratory illness, filtration systems would be better for you than a standard filtered system. American Standard’s AccuClean Whole-Home Air Filtration System is an excellent option. It can remove up to 99.98 percent of airborne pollutants from home, and it comes with a reusable filter.

Tip 3: Check the Outside Unit

Over time, grass clippings, leaves, dirt, and branches can build up outside the outdoor unit. When this happens, it decreases the unit’s capacity, and it will reduce the airflow. If there are just a few leaves or branches near the unit, you can just move them away. If anything is growing too close to the outdoor unit, you should consider having it removed. It will be a lot to keep up with if you are always going outside to trim the bush or shrub down. You might be better off removing it, which will give your condenser all of the room that it needs.

If you want to clean the entire area, there are a few things that you need to do. First, turn off the power to the unit. This can be done either by using the service disconnect button on the outdoor unit, or you can turn off the power to the home’s main breaker.

To clean the unit, use a garden hose to gently wash away the debris, starting at the top and working our way down. You should never use a powerwasher. This can cause damage to the unit. The force of the water can bend or damage the delicate coils and fins. Finally, check the aluminum cooling fans on the compressor. To be sure that they are working correctly, they need to be straight. If they aren’t, you might need to call a professional in ac repair.

If there are any bushes or shrubs around the outdoor unit, make sure that they are trimmed down … Read More


Top Tips For Heating Repair

0 Comments

As the winter months approach, it’s important to make sure your heating system is in top working condition. Whether you’re a homeowner or a business owner, you want to ensure that your heating system is running efficiently and effectively. At Langhorne HVAC, we understand the importance of a functioning heating system and have put together some tips to help you with your heating repair needs. From simple maintenance to identifying and addressing common issues, we’ve got you covered. Keep reading to learn more about how you can keep your heating system running smoothly this winter.

The Heating Unit in Your House Will not Switch off 

If the heating unit in your home carries on running and blowing warm air, you should first ensure that it is set to ‘auto,’ instead of ‘on.’ This way, it will stop running once it achieves the programmed temperature. 

In the event that it carries on running after this, you might have a thermostat that is wired wrongly or broken. Also, there might be a problem with the blower on your heating unit. Your first action should be to check that the wiring is properly plugged into the thermostat. Then, you should program it to the settings advised by the manufacturer, to test how the unit runs. If you get no joy with this, you might have to get a new thermostat. 

In the event that the blower is causing the problem, you should get in touch with a heating repair contractor to diagnose and rectify the issue. 

Parts of Your Home are not Heating Correctly 

If your house is getting different levels of heating in different areas, you might have an air filter that is dirty or problems with your ductwork. Alternatively, the heating unit’s bearings, belts or fan motor could be causing the problem. Getting a new air filter is simple; however, if there are issues with your unit or ductwork, you ought to contact a heating repair contractor. 

Cold air is Emanating From Your Vents 

If you have a furnace or heat pump, your home’s central heating unit distributes warmth throughout your property via a network of air ducts. While leaking ducts might impact the temperature of air that emanates from the vents, there are a few easy fixes that you should try initially. 

The Thermostat — Firstly, look at your thermostat to check that it is set to the correct temperature. If it is, turn it up slightly to see if you notice the temperature difference. Furthermore, the thermostat ought to be set to ‘auto,’ instead of ‘fan on.’ Otherwise, the fan will simply emit cool air. Assuming that this all seems fine, you need to move on to examine your air filter. 

The Air Filter — You should get a replacement air filter every few months, or sooner because they accumulate lots of debris and dirt. As a result, it becomes harder for your heating unit to work correctly, which might be why it is emitting cold air. 

The Pilot Light — Look at the pilot light on your heating unit, to see whether it is lit. If it isn’t, then gas may not be reaching it. The problem could be that the gas valve isn’t on. If not, you ought to contact a Plano heating unit contractor to rectify the issue. 

The Fuel — Irrespective of whether your heating unit runs on oil, electric or gas, it should have sufficient fuel to operate correctly, and it will not be efficient otherwise. 

The Air Ducts — Leaking ducts might be responsible too. A simple way to find out is to switch your fan on, then visit your loft or crawl space. Tread on the ductwork to see whether any air is blowing. If nothing is noticeable, you can light some incense carefully, and hold this close to a junction point joint (do this for each one), to discover whether any smoke blows out of the ductwork. If it does, then you know there’s a leak problem. 

The Heating Unit in Your House Will not Ignite or Remain Ignited 

If you have a fairly new heater, it probably uses electronic ignition, with a pilot light that is intermittent, instead of a conventional pilot light. Occasionally, the sensors that check gas is not flowing if the heater is off become dirty, and have to be replaced or cleaned. 

The Controls on the Thermostat do not Work. 

If you are having problems with temperature setting or altering the unit controls, the thermostat might be the cause once again. Use the troubleshooting advice detailed above. And, if your thermostat is digital, try getting some new batteries. If these measures are ineffective, you could try resetting the thermostat to the settings recommended by the manufacturer. 

If the issue persists, you should check whether a tripped circuit is the cause. Lastly, you can reexamine the wiring, although a trusted HVAC contractor will be better able to identify the issue. 

The fan on Your Heating Unit Doesn’t Work 

If the fan on your heating unit doesn’t work, you ought to first examine the thermostat to check that it is in the proper setting. Then, look at the air filter to check that it is clean; occasionally, a filthy air filter will cause your fan to malfunction. 

Lastly, turn your circuit breakers on, if they are not on already, but do not turn them off and on frequently, because this might cause a fire. If these troubleshooting techniques are ineffective, get in touch with a qualified heating unit contractor. 

Your Heating Unit is Moldy 

In Florida, the climate is fairly moist, so dampness can accumulate in your property’s heating unit, especially if the ductwork or insulation is faulty or substandard. In this situation, mould can develop in the heating unit. 

The most effective way to address this is to hire a knowledgeable heating unit contractor to clean the unit, and if required, correctly seal and insulate your ducts to prevent moisture from gathering. 

As already stated, it is … Read More